HP StorageWorks P9000 - Disk Arrays Reference Manual page 136

Description on each column in output example
T
This displays the type of the volume group.
R: Parity Group, E: External Volume Group
GROUP
This displays the External Volume Group number.
Num_LDEV
This displays the number of LDEV assigned to this External Volume Group.
U(%)
This displays the usage rate of this External Volume Group.
AV_CAP(GB)
This displays the available capacity (Free space) for this External Volume Group.
R_LVL
This displays the RAID level of the parity group. As the external volume group is not relevant, "-"
(bar) is displayed.
E_TYPE
This displays the base emulation type of the external volume group.
SL
This displays SLPR that the External Volume Group belongs to (Always displays 0).
CL
This displays the CLPR to which an External Volume Group belongs.
DRIVE_TYPE
This displays the Product ID included in the SCSI Inquiry command of the External Volume Group.
This displays the external volume information by specifying the external volume group.
# raidcom get external_grp -external_grp_id 01-01
T GROUP P_NO LDEV# STS LOC_LBA SIZE_LBA Serial#
E 1-1 0 - NML 0x000000000000 0x000000003f00 64034
E 1-1 1 200 NML 0x000000003f00 0x000000010000 64034
E 1-1 2 201 REG 0x000000013f00 0x000000010000 64034
E 1-1 3 - DEL 0x000000023f00 0x0000f0000000 64034
Description on each column in output example
T
This displays the type of the volume group.
R: Parity Group, E: External Volume Group
GROUP
This displays the External Volume Group number.
P_NO
This displays the partition number in this External Volume Group.
LDEV#
This displays LDEV number assigned to this External Volume Group.
STS
This displays the following status.
- NML: this means the status of "Normal" in LDEV.
- REG: this means the status of "Registering" in LDEV.
136 Configuration setting commands