Raidcom Modify Pool; Syntax - HP StorageWorks P9000 - Disk Arrays Reference Manual

Displaying pool name.
# raidcom get pool
PID POLS U(%) POOL_NAME
001 POLN 10
002 POLF 95
003 POLS 100
004 POLN 0
Description on each column in output example
PID
This displays the Snapshot pool ID.
POLS
This displays the following status in the Snapshot pool.
- POLN: "Pool Normal" (The pool is in the normal status.)
- POLF: "Pool Full" (The pool is in the overflow status exceeding the threshold.)
- POLS: "Pool Suspend" (The pool is in the overflow status exceeding the threshold and is suspended.)
- POLE: "Pool failure" (The pool is suspended in the failure status.)
In this status, the pool information cannot be displayed.
U(%)
This displays the usage rate of the pool.
SSCNT
This displays the number of volumes in the pool.
POOL_NAME
This displays the pool name.
Available (MB)
This displays the capacity available to the volume data in the pool.
Capacity (MB)
This displays the total capacity of the pool.
Seq#
Product serial number.
Num
This displays the number of LDEV configured the pool.
LDEV#
This displays the first number of LDEV configured the pool.
H(%)
This displays threshold for the pool.
VCAP (%)
This displays the maximum reserved rate of a V-VOL for the pool capacity. "-" indicates unlimited.

raidcom modify pool

Sets the option of a pool for Snapshot/Thin Provisioning/Smart Tiers.
When specifying the -status option, the operation is executed asynchronously with the command
input. Check the completion of this process on the raidcom get command_status command.

Syntax

raidcom modify pool -pool {<pool ID#> | <pool naming>}
{ -status <status> | -user_threshold <%> | -tier <Tier number><threshold>| -subscription <%>
| -pool_attribute <pool_attribute>}
Seq# Num LDEV# H(%) VCAP(%)
my_aou_pool 62500 2 265
New_Pool_2 62500 3 270
my_ss_pool 62500 1 275
New_Pool_4 62500 2 280
80 65500
70 -
70 -
80 - 005 POLE 0 New_Pool_5 62500 4
raidcom modify pool
0 80
171