HP StorageWorks P9000 - Disk Arrays Reference Manual page 69

Option Description
-find inst Registers the Device File name (raw device file provided via STDIN) to all mirror descriptors of the
LDEV map table for HORCM, permits the matching volumes on horcm.conf in protection mode, and
is started automatically by "/etc/horcmgr". Therefore, you will not need to use this option normally.
This option will also be terminated to avoid wasteful scanning when the registration has been finished
with based on HORCM. Therefore if HORCM does not need the registration any more, then nothing
is done and it exits. This option can be used with "-fx" option to display LDEV numbers in hexadecimal.
Example for HP-UX:
# ioscan -fun | grep rdsk | raidscan -find inst
DEVICE_FILE Group PairVol PORT TARG LUN M SERIAL LDEV
/dev/rdsk/c0t3d0 oradb oradev1 CL1-D 3 0 - 35013 17
/dev/rdsk/c0t3d0 oradb oradev1 CL1-D 3 0 0 35013 17
/dev/rdsk/c0t3d0 oradb1 oradev2 CL1-D 3 0 1 35013 17
NOTE:
LDEV map table.
Group: This displays the group name (dev_group) defined in the configuration definition file.
PairVol: This displays the paired volume name (dev_name) within the group defined in the
configuration definition file.
PORT: This displays the port number (port#) defined in the configuration definition file.
TARG: This displays the targetID (TargetID) defined in the configuration definition file.
LUN: This displays the LUN (LU#) defined in the configuration definition file.
M: This displays the MUN (MU#) defined in the configuration definition file. MU# for HORC are
shown as "-", and MU# for Business Copy/Snapshot are shown as "0", "1", "2".
SERIAL: This displays the production (serial#) number of the RAID storage system.
LDEV: This displays the LDEV# within the RAID storage system.
When multiple device files share the same LDEV, the first device file is registered to the
raidscan 69