Raidcom Get Thp_Pool; Examples; Syntax; Options And Parameters - HP StorageWorks P9000 - Disk Arrays Reference Manual

Examples

By using LDEVs:400, 401, and 402, creating a pool of Pool ID:1, pool name: my_pool for Thin
Provisioning.
# raidcom add thp_pool -pool_id 1 -pool_name my_pool -ldev_id 400 401 402
By using LDEVs:500, 501, and 502, creating a pool of Pool ID: Allocated automatically, Pool
Name: my_pool for Thin Provisioning.
# raidcom add thp_pool -pool_name my_pool -ldev_id 500 501 502
By using LDEVs:600, 601, and 602, creating a pool of Pool ID: 2, Pool Name: Allocated
automatically for Thin Provisioning.
# raidcom add snap_pool -pool_id 2 -ldev_id 600 601 602
By using LDEVs: 700, 701, and 702, creating a pool of Pool ID: 3, Pool Name: my_pool for Thin
Provisioning with the user-defined thresholds WARNING specified to 70% and High water mark
to 80%.
# raidcom add thp_pool -pool_id 3 -pool_name my_pool -ldev_id 700 701 702 -user_threshold 70 80
Add LDEV: 368 to the pool ID: 10 for Thin Provisioning/Smart Tiers.
# raidcom add thp_pool -pool_id 10 -ldev_id 368
By using LDEV belonging to the device group: grp1, creating a pool of Pool ID:1, Pool Name:
Allocated automatically for Thin Provisioning.
# raidcom add thp_pool -pool_id 1 -grp_opt ldev -device_grp_name grp1

raidcom get thp_pool

Displays pool information for Thin Provisioning/Smart Tiers.

Syntax

raidcom get thp_pool [ -key <keyword>]

Options and parameters

Option
[ -key <keyword> ]
Examples
Displaying the pool information of the pool for Thin Provisioning/Smart Tiers.
# raidcom get thp_pool
PID POLS U(%)
001 10
002 POLF
004 POLN
Description on each column in output example
PID
This displays the Thin Provisioning/Smart Tiers pool ID.
POLS
This displays the following status of the pool.
- POLN: "Pool Normal" (The pool is in the normal status.)
- POLF: "Pool Full" (The pool is in the overflow status exceeding the threshold.)
- POLS: "Pool Suspend" (The pool is in the overflow status exceeding the threshold and is suspended.)
188 Configuration setting commands
Description
Specifies a display keyword. Specify opt as <keyword>.
AV_CAP(MB) TP_CAP(MB) W(%) H(%) Num LDEV#
45000000 50000000
95 10000 100000000
0 10000000 100000000
50 80 2 265
50 80 3
80 90 2
LCNT TL_CAP(MB)
33 65000000
270 900 100000000
280 0 200000000