Raidcom Monitor Pool; Options And Parameters; Examples; Syntax - HP StorageWorks P9000 Reference Manual

syntax

raidcom reset hba_wwn -port <port>[<host group name>] -hba_wwn <WWN strings>

Options and parameters

Option
-port <port>[<host
group name>]
-hba_wwn <WWN
strings>

Examples

Deleting the nickname that is given to the connection host "WWN:210000e0,8b0256f8" to which
the CL4-E or Host group #0 are set.
raidcom reset hba_wwn -port CL4-E-0 –hba_wwn 210000e0,8b0256f8

raidcom monitor pool

Sets the start or stop of performance monitoring of a pool for Smart Tiers.
Syntax
raidcom monitor pool -pool {<pool ID#> | <pool naming>} -operation <type>
Options and parameters
Option
-pool {<pool ID#> |
<pool naming>}
-operation <type>
Examples
Starting the performance monitoring of a pool for Smart Tiers of the Pool ID: 20.
raidcom monitor pool -pool 20 -operation start
Starting the performance monitoring of a pool for Smart Tiers of the Pool Name: my_tier_pool.
# raidcom monitor pool -pool my_tier_pool -operation start
Stopping the performance monitoring of a pool for Smart Tiers of the Pool ID: 20.
raidcom monitor pool -pool 20 -operation stop
Stopping the performance monitoring of a pool for Smart Tiers of the Pool Name: my_tier_pool.
Description
Specifies a port number.
For example:
CL1-A-g (g: 0-255)
CL1-A Linux_X86
Specifies WWN value (hexadecimal value).
For example:
21000e08b0256f8
21000e0,8b0256f8 (The value can be split in units of 4 bytes by "," (commas)).
Description
Specifies a pool ID (0- 1 27) or a pool name of a pool for Smart Tiers.
When specifying a number, it is recognized as a pool ID. Therefore, when you specify a pool
that the pool name is only a number, operate by specifying pool ID instead of specifying pool
name.
Instructs the operation of performance monitoring.
The operational types that can be specified:
start: Start the performance monitoring.
stop: Stop the performance monitoring.
raidcom monitor pool 193