HP StorageWorks P9000 - Disk Arrays Reference Manual page 156

OPE_RATE : 100
MP# : 2
Description on each column in output example
-Serial#
Product serial number.
LDEV
It shows an LDEV number.
SL
It shows the information of SLPR (It is fixed as 0 on the devices other than XP24000/XP20000
Disk Array).
CL
It shows the information of CLPR.
VOL_TYPE
It shows an emulation type of the relevant LDEV.
This displays the same name as the product ID of the Inquiry command.
If the LDEV is not installed or in the state of creating or deleting an LDEV, the following items are
displayed depend on the status.
NOT DEFINED: An LDEV is not installed.
DINING: An LDEV is being created.
REMOVING: An LDEV is being deleted.
VOL_Capacity (BLK)
It shows the capacity of LDEV in block size.
NUM_LDEV
It shows the number of LDEVs that configures the LU where the specified LDEV is belongs to.
LDEVs
It shows the number of LDEV that configures LU.
NUM_PORT
It shows the number of ports defined to the paths for relevant LDEV.
PORTs
It lists up the ports defined to the paths for the relevant LDEV.
F_POOLID
This displays a pool ID if the LDEV is a component of the pool. In other cases, "NONE" is displayed.
VOL_ATTR
It lists up the attributes of the following LDEVs.
CMD: Command device
CLUN: Cache LUN (DCR)
CVS: CVS volume
LUSE: LUSE volume
ALUN: Auto LUN volume
ELUN: External volume
OLG: OpenLDEV Guard volume
VVOL: VVOL
HARD: Oracle H.A.R.D volume
156 Configuration setting commands