Raidcom Modify Port; Syntax - HP StorageWorks P9000 - Disk Arrays Reference Manual

AUT(AUTO), 1G,2G,4G, 8G...
LPID
This displays the Loop ID(AL_PA) setting on a port.
FAB
This displays the fabric mode setting on a port as Y(YES) or N(NO).
CONN
This displays the following topology setting on a port.
FCAL/PtoP
SSW
This displays the LUN security setting on a port as Y (enabled) or N (disabled).
SL
This displays the SLPR number where a port is belonging.
Serial#
Product serial number.
WWN
This displays the external WWN
Displaying the information of the port CL4-E.
# raidcom get port -port CL4-E
PORT LOGIN_WWN Serial# -
CL4-E 210000e08b0256f8 63528 OLA_NODE0_CTL_0
CL4-E 210000e08b039c15 63528 OLA_NODE1_CTL_0
Description on each column in output example
PORT
It displays the port numbers.
LOGIN_WWN
This displays WWN of the host adapter login to this port.
NOTE: Only the currently connected WWN is displayed unlike the display on Remote Web
Console.
Serial#
Product serial number.
Displays a PPC name of WWN if defined by the PPC function.

raidcom modify port

Sets the attribute value of the specified port.
The specified port must be "TYPE=FIBRE and ATTR=TAR", if not it will be rejected with EX_ENOOBJ.

Syntax

raidcom modify port -port <port>{[-port_speed <value>] [-loop_id <value>]
[-topology <topology>] [-security_switch < y|n >] | -port_attribute <port attribute>}
174 Configuration setting commands