Command Format - HP StorageWorks P9000 - Disk Arrays Reference Manual

Table 5 Configuration setting commands (continued)
Command
raidcom delete rcu_path
raidcom add journal
raidcom delete journal
raidcom modify journal
raidcom get journal
raidcom add snap_pool
raidcom add thp_pool
raidcom delete pool
raidcom modify pool
raidcom get pool
raidcom get snap_pool
raidcom get thp_pool
raidcom set hba_wwn
raidcom reset hba_wwn
raidcom add copy_grp
raidcom delete copy_grp
raidcom get copy_grp
raidcom add device_grp
raidcom delete device_grp
raidcom get device_grp
raidcom lock resource
raidcom unlock resource
raidcom get resource
raidcom monitor pool
raidcom reallocate pool
raidcom get command_status
raidcom reset command_status

Command format

In this manual, the format of commands are described in accordance with the following description
convention.
16 Overview of commands
Description
Deletes a logical path between RCUs.
Registers a journal volume to a journal.
Deletes a journal volume from a journal. and delete the journal.
Changes an option of Continuous Access Journal to be used at
a journal.
Displays a journal group information.
Creates a pool for Snapshot.
Creates a pool for Thin Provisioning.
Deletes a pool for Snapshot/Thin Provisioning/Smart Tiers.
Sets an option of a pool for Snapshot/Thin Provisioning/Smart
Tiers.
Displays pool information for Snapshot/Thin Provisioning/Smart
Tiers.
Displays pool information for Snapshot.
Displays pool information for Thin Provisioning/Smart Tiers.
Sets a nickname to the WWN specified on the specified port.
Deletes a nickname from the WWN specified on the specified
port.
Creates a copy group.
Deletes a copy group.
Displays copy group information.
Creates a device group.
Deletes a device group.
Displays a device group.
Locks a resource.
Unlocks a resource.
Displays resource group information.
Starts or stops the performance monitoring for Smart Tiers.
Starts or stops a reallocation of the Smart Tiers pool.
Displays an error information of the configuration setting
command which is executed asynchronously.
Resets an error information of the configuration setting command
which is executed asynchronously.