Raidvchkset; Syntax; Options And Parameters - HP StorageWorks P9000 - Disk Arrays Reference Manual

raidvchkset

The raidvchkset command sets the parameters for validation checking of the specified volumes,
and can also be used to turn off all validation checking without specifying [type]. Unit of checking
for the validation is based on the group of RAID Manager configuration definition file.
This command is controlled as protection facility. This command is rejected with EX_ERPERM by
connectivity checking between RAID Manager and the RAID storage system.

Syntax

raidvchkset { -h | -q | -z | -I[H][M][instance#] or I[TC][SI][instance#]
| -g <group> | -d <pair Vol> | -d[g] <raw_device> [MU#]
| -d[g] <seq#> <LDEV#> [MU#] | -nomsg | -vt [type]
| -vs < bsize> [slba] [elba] | -vg

Options and parameters

Option
-h
-q
-z or -zx
-I[H][M]
[instance#]
or
-I[TC][SI]
[instance#]
-g <group>
-d <pair Vol>
-d[g]
<raw_device>
[MU#]
-d[g] <seq#>
<LDEV#> [MU#]
-nomsg
Description
Displays Help/Usage and version information.
Terminates the interactive mode and exits the command.
Makes the raidvchkset command enter the interactive mode. The -zx option guards performing of
the HORCM in the interactive mode. When this option detects a HORCM shut down, interactive
mode terminates.
OpenVMS cannot use the -zx option.
Specifies the command as [HORC]/[HOMRCF] or [Continuous Access Synchronous]/[Business Copy],
and used when specifying the RAID Manager instance number.
Specifies a group name written in the configuration definition file.
Specifies paired logical volume name defined in the configuration definition file. When this option
is specified, the command is executed for the specified paired logical volume.
Searches a group on the configuration definition file (local instance) for the specified raw_device,
and if the specified raw_device is contained in the group, the target volume is executed as the paired
logical volume (-d) or group (-dg). This option is effective without specification of "-g <group>" option.
If the specified the raw_device is contained in two or more groups, the command is executed on the
first group.
Searches a group on the configuration definition file (local instance) for the specified LDEV, and if
the specified LDEV is in the group, the target volume is executed as the paired logical volume (-d) or
group (-dg). This option is effective without specification of "-g <group>" option. If the specified LDEV
is contained in two or more groups, the command is executed on the first group. The <seq #> <LDEV
#> values can be specified in hexadecimal (by addition of "0x ") or decimal notation.
Suppresses messages to be displayed when this command is executed. It is used to execute this
command from a user program. This option must be specified at the beginning of a command
argument. The command execution log is not affected by this option.
[type] [rtime] | -vext <size> }
raidvchkset 77