Raidcom Modify Ldev; Options And Parameters; Examples; Syntax - HP StorageWorks P9000 - Disk Arrays Reference Manual

Options and parameters

Option
-ldev_id <ldev#>
-grp_opt <group
option>
-device_grp_name
<device group name>
[<device name>]
-operation <type>

Examples

Performing Quick Format for a LDEV: 200.
raidcom initialize ldev -operation qfmt -ldev_id 200
Performing Quick Format for an LDEV belonging to the device group: grp1.
raidcom initialize ldev -operation qfmt -grp_opt ldev -device_grp_name grp1

raidcom modify ldev

Changes the LDEV attributes. What can be operated:
Switching LDEV normal and LDEV blockade
Setting LDEV nickname
Setting MP Blade ID of LDEV
Setting the start/stop of reallocation of V-VOL for Smart Tiers
Instructing the page discarding of V-VOL for Thin Provisioning/Smart Tiers
When executing LDEV blocking or recovery operation, this command is executed asynchronously
with the command input. Check the completion of this process on the raidcom get command_status
command.

Syntax

raidcom modify ldev -ldev_id <ldev#> {-status <status> | -ldev_name <ldev naming> |
-mp_blade_id <mp#>}
160 Configuration setting commands
Description
Specifies an LDEV number (0-65279).
For example:
-ldev_id 200
Specifies the device information extracted from the LDEV belonging to the device group. Specify
"ldev" (fixed). The information of LDEV belonging to the device group is used.
Specifies the name of device group (max. 32 characters) to be operated.
To operate an LDEV in the device group, specify the device name of LDEV (max. 2 characters)
within the device group.
If the device name is omitted, all the LDEVs belonging in the device group are operated.
Instructs the operation.
The following operation can be specified:
qfmt: Quick Format