Raidqry; Syntax; Options And Parameters; Returned Values - HP StorageWorks P9000 - Disk Arrays Reference Manual

13:45:28CL1-A156SMPL---200.080.040.0600
CL1-B145P-VOLPAIR133.335.013.4400
CL1-A123P-VOLPSUS200.035.040.6600
Output of the raidar command:
IOPS: # of I/Os (read/write) per second (total I/O rate).
HIT(%): Hit rate for read I/Os (read hit rate).
W(%): Ratio of write I/Os to total I/Os (percent writes).
IOCNT: Number of write and read I/Os.

raidqry

The raidqry command (RAID query) displays the configuration of the connected host and RAID
storage system.

Syntax

raidqry { -h | -q | -z | -I[H][M][instance#] or I[TC][SI][instance#]
| -l | -r <group> | [ -f ]

Options and parameters

Option
-h
-q
-z or -zx
-I[H][M]
[instance#]
or
-I[TC][SI]
[instance#]
-l
-r <group>
-f
-g

Returned values

None

Error codes

None
Description
Displays Help/Usage and version information.
Terminates the interactive mode and exits the command.
Makes the raidqry command enter the interactive mode. The -zx option guards performing of the
HORCM in the interactive mode. When this option detects a HORCM shutdown, interactive mode
terminates.
OpenVMS cannot use the -zx option.
Specifies the command as [HORC]/[HOMRCF] or [Continuous Access Synchronous]/[Business Copy],
and used when specifying the RAID Manager instance number.
Displays the configuration information for the local host and the local RAID storage system.
Displays the configuration information for the remote host and the remote storage system which
contains the specified group.
Displays the host name (ip_address) as specified in the configuration definition file. Use this option
if "floatable IP address" is used for the host name (ip_address) in the configuration file.
This option is used when displaying the lists of group name (dev_group) which is described in the
configuration file of a local host (instance).
| -g}
raidqry 75