HP StorageWorks P9000 - Disk Arrays Reference Manual page 57

Option Description
-v jnl[t Displays the JNL status for the local and remote interconnected to the group. Also finds the journal
ID for each local and remote interconnected to the group via the specified group or <raw_device>,
and displays information of each journal ID corresponding the local and remote. The first line shows
the journal information for the local host, second line shows the journal information for the remote
host. The item for displaying is the same as raidvchkscan -v jnl[t].
Example:
# pairdisplay -g VG01 -v jnl
JID MU CTG JNLS AP U(%) Q-Marker Q-CNT D-SZ(BLK) Seq# Nnm LDEV#
001 0 2 PJNN 4 21 43216fde 30 512345 62500 2 265
002 0 2 SJNN 4 95 3459fd43 52000 512345 62538 3 270
Example:
# pairdisplay -g VG01 -v jnlt
JID MU CTG JNLS AP U(%) Q-Marker Q-CNT D-SZ(BLK) Seq# DOW PBW APW
001 1 2 PJNN 4 21 43216fde 30 512345 62500 20 300 40
002 1 2 SJNN 4 95 3459fd43 52000 512345 62538 20 300 40
Example:
# pairdisplay -g VG01 -v jnl -FCA 1
JID MU CTG JNLS AP U(%) Q-Marker Q-CNT D-SZ(BLK) Seq# Nnm LDEV#
003 1 2 PJNN 4 21 43216fde 30 512345 62500 2 265
Notes:
This option can be specified with following options on the same command line:
{-g<group> | -d <pair Vol> | -d[g] <raw_device> [MU#] | -FCA [MU#] | -d[g] <seq#> <LDEV#>
[MU#] | -l | -f[x] }
"-FCA [MU#]" option is used when displaying the journal information of cascading Cnt Ac-J
volume, and then it shows the journal information for the remote host only.
This option displays nothing if the target volume is NOT a Cnt Ac-J volume.
pairdisplay 57