HP StorageWorks P9000 - Disk Arrays Reference Manual page 50

Table 14 pairvolchk returned values (continued)
Condition
For Continuous
Access
Asynchronous and
Continuous Access
Journal
For a Snapshot
Volume
50 Replication commands
Value
42: The status is P-VOL_COPY.
43: The status is P-VOL_PAIR.
44: The status is P-VOL_PSUS.
45: The status is P-VOL_PSUE.
46: The status is P-VOL_PDUB (Continuous Access Synchronous & LUSE volume only).
47: The status is P-VOL_PFUL.
48: The status is P-VOL_PFUS.
52: The status is S-VOL_COPY or S-VOL_RCPY.
53: The status is S-VOL_PAIR.
54: The status is S-VOL_PSUS.
55: The status is S-VOL_PSUE.
56: The status is S-VOL_PDUB (Continuous Access Synchronous & LUSE volume only).
57: The status is S-VOL_PFUL.
58: The status is S-VOL_PFUS.
For group status, see:
214: EX_EXQCTG
216: EX_EXTCTG
236: EX_ENQVOL
237: EX_CMDIOE
235: EX_EVOLCE ... When the -c option is specified only.
242: EX_ENORMT... When the -c option is specified only.
The Snapshot needs to show the status of Full of the Snapshot Pool as Snapshot condition. For this
purpose, Snapshot also uses PFUL and PFUS status which is the status of Full of the sidefile for
Continuous Access Asynchronous. The APP can refer this status as the return value.
22: The status is P-VOL_COPY or P-VOL_RCPY.
23: The status is P-VOL_PAIR.
24: The status is P-VOL_PSUS.
25: The status is P-VOL_PSUE.
26: The status is P-VOL_PDUB (HORC & LUSE volumes only).
27: The status is P-VOL_PFUL (PAIR closing Full status of the Snapshot Pool).
28: The status is P-VOL_PFUS (PSUS closing Full status of the Snapshot Pool).
29: The status is P-VOL_INCSTG (Inconsistent status in group) ... Not returned.
32: The status is S-VOL_COPY or S-VOL_RCPY.
33: The status is S-VOL_PAIR.
34: The status is S-VOL_PSUS.
35: The status is S-VOL_PSUE.
36: The status is S-VOL_PDUB (HORC & LUSE volumes only).
37: The status is S-VOL_PFUL (PAIR closing Full status of the Snapshot Pool).
38: The status is S-VOL_PFUS (PSUS closing Full status of the Snapshot Pool).
39: The status is S-VOL_INCSTG (Inconsistent status in group) ... Not returned.
You can set the threshold for the specified pool via Remote Web Console. The default value is
80% of pool capacity. PFUS is set when the Snapshot pool became over threshold in the PSUS
state. PFUL is set when the Snapshot pool became over threshold in the PAIR state.