HP StorageWorks P9000 - Disk Arrays Reference Manual page 52

P-VOL or S-VOL_PAIR (except SSUS(SSWS)): this shows the minimum in Active Paths on specified
group in Cnt Ac-J.
S-VOL_ SSUS(SSWS): MINAP shows the result of the suspend operation that indicates whether or
not the remaining All data on P-VOL were Passed (synchronized) to S-VOL completely. If MINAP
is "one", All data were passed. If not, all data were not passed from P-VOL.
Note: If RAID F/W is not supporting the active paths, then the "MINAP" item is not displayed as
follows:
pairvolchk : Volstat is P-VOL.[status = PAIR fence = ASYNC CTGID = 2]
Example 3
Display example for LDEV blockading:
# pairvolchk -g oradb
pairvolchk : Volstat is P-VOL.[status = PAIR fence = DATA
LDEV = BLOCKED: Displays the status of LDEV blockading in order to detect a link failure of E-LUN.
Example 4
The following shows examples of the pairvolchk command and its output.
# pairvolchk -g
pairvolchk : Volstat is P-VOL.[status = PAIR fence = ASYNC CTGID = 2]
# pairvolchk -g
pairvolchk : Volstat is P-VOL.[status = PAIR fence = DATA ]
pairvolchk -g oradb
pairvolchk : Volstat is P-VOL.[status = PAIR ]
# pairvolchk -g oradb
pairvolchk : Volstat is P-VOL.[status = PAIR CTGID = 1]
Example 5
The following shows a pairvolchk example that acquires the status (P-VOL_PSUS) of the intermediate
P/Pvol through specified pair group on Business Copy environment. The following figure shows a
pairvolchk example that acquires the status (P-VOL_PSUS) of the intermediate S/Pvol (MU#1)
through specified pair group on Continuous Access Synchronous environment.
Figure 22 Example of -FHORC option for pairvolchk
52 Replication commands
oradb
oradb
MINAP = 2 LDEV = BLOCKED]
<= Continuous Access Asynchronous
<= Continuous Access Synchronous
<= Business Copy
<= Business Copy at-time split