Returned Values; Error Codes; Examples - HP StorageWorks P9000 - Disk Arrays Reference Manual

Returned values

The pairresync command sets the following returned values during exit, allowing you to check the
execution results.
Normal termination: 0. When resynchronizing groups, 0 = normal termination for all pairs.
Abnormal termination: Other than 0, see the execution logs for error details.

Error codes

Unrecoverable errors are fixed and not resolved, even after re-executing the command. If the
command failed, the detailed status is logged in the RAID Manager command log ($HORCC_LOG),
even if the user script has no error handling.
The primary and secondary volumes must not be mounted on any UNIX system, because the
pairresync command renews data on both the primary and secondary volumes. This command
cannot execute copy rejection in case of error (For example, single error in cache memory) which
made the target volume is accompanied by maintenance work (HORC only).
Table 10 Specific error codes for pairresync
Category
Volume status
Unrecoverable

Examples

Figure 13 Example of -FHORC option for pairresync
Figure 14 Example of -FMRCF option for pairresync
Error code Error message
EX_ENQVOL Unmatched volume
status within the
group
EX_INCSTG Inconsistent status in
group
EX_INVVOL Invalid volume status
EX_INVSTP Invalid pair status
Recommended action
Confirm status using the pairdisplay command.
Make sure all volumes in the group have the
same fence level and volume attributes.
Confirm pair status using pairdisplay.
Confirm pair status using pairdisplay -l.
Confirm pair status using pairdisplay.
Value
236
229
222
228
pairresync 39