Options And Parameters; Examples - HP StorageWorks P9000 - Disk Arrays Reference Manual

Options and parameters

Option
-port <port>[<host
group name>]

Examples

Displaying the LU information defined to the port CL4-E, the host group #0.
# raidcom get lun -port CL4-E-0
PORT GID HMD LUN NUM LDEV CM Serial# HMO_BITs
CL4-E 0 LINUX/IRIX 0 1 0 CM 63528 2 13
CL4-E 0 LINUX/IRIX 2 1 2 - 63528 2 13
CL4-E 0 LINUX/IRIX 3 1 3 - 63528 2 13
CL4-E 0 LINUX/IRIX 4 1 4 - 63528 2 13
CL4-E 0 LINUX/IRIX 5 1 992 - 63528 2 13
CL4-E 0 LINUX/IRIX 6 1 993 - 63528 2 13
Description on each column in output example
PORT
This displays the port number.
GID
This displays the host group ID on port.
HMD
This displays the following HOST MODE for the host adapter setting on host group.
HP-XP, SOLARIS, AIX, WIN, LINUX/IRIX, TRU64, DYNIX, OVMS, NETWARE,
VMWARE, HP-XP, VMWARE_EX, WIN_EX, Ext Stor
LUN
This displays LUN number on host group mapping LDEV.
NUM
This displays the number of LDEV configured an LUSE.
LDEV
This displays the LDEV number.
CM
This displays the command device.
Serial#
Product serial number.
HMO_BITs
This displays the following BITs for HOST mode option setting on host group.
BIT meaning
2 VERITAS Database Edition/Advanced Cluster
6 TPRLO
Description
Specifies a port number, a host group ID, and a host group name. It cannot be specified when
more than 64 characters are set for the host group name. Use the host group ID. If setting the
host group ID or the host group name is omitted, the LU path information on host group ID 0
is displayed.
For example:
CL1-A
CL1-A-g (g: 0-255)
CL1-A Linux_X86
raidcom get lun 165