Raidcom Delete Pool; Syntax; Options And Parameters; Examples - HP StorageWorks P9000 - Disk Arrays Reference Manual

- DSC: this means the status of "disconnected" in external path.
- UNK: this means the status of "Unknown" in external path.
-Serial#
This displays the serial number of external storage system.
-PRODUCT_ID
This displays the PRODUCT_ID of the external storage system.

raidcom delete pool

Deletes the specified pool for Snapshot/Thin Provisioning/Smart Tiers. The deletion of pool VOL
is not supported on Version01.
This command is executed asynchronously with the command input. Check the completion of this
process on the raidcom get command_status command.

Syntax

raidcom delete pool -pool {<pool ID#> | <pool naming>}

Options and parameters

Option
-pool {<pool ID#> | <pool
naming>}

Examples

Deletes a pool of pool ID: 5.
raidcom delete pool -pool_id 5
Deletes a pool of pool name: my_aou_pool.
# raidcom delete pool -pool my_aou_pool

raidcom get pool

Displays pool information for Snapshot/Thin Provisioning/Smart Tiers.
Syntax
raidcom get pool [-key <keyword>]
Options and parameters
Option
[-key <keyword>]
Examples
Displaying Pool information.
# raidcom get pool
PID POLS U(%) SSCNT Available(MB) Capacity(MB) Seq# Num LDEV# H(%)
001 POLN 10 330 10000000 1000000000 62500 2 365 80
002 POLF 95 9900 100000 1000000000 62500 3 370 70
003 POLS 100 10000 100 1000000000 62500 1 375 70
004 POLE 0 0 0 0 62500 0 0 80
170 Configuration setting commands
Description
Specifies a pool ID (0- 1 27) or a pool name for Snapshot/Thin Provisioning/Smart Tiers.
When specifying a number, it is recognized as a pool ID. Therefore, when you specify a
pool that is only a number, operate by specifying pool ID instead of specifying pool name.
Description
Specifies when displaying a pool name. Specify "opt" to <keyword>.