Where Can I Get More Information; Write Protecting Cartridges - HP DW017B - StorageWorks Ultrium 448 Tape Drive User Manual

Half-height sas tape drives

Hide thumbs Also See for DW017B - StorageWorks Ultrium 448 Tape Drive:

Table of Contents

Where can I get more information?

For more information about AES encryption, encryption keys, and using hardware encryption with your

HP Ultrium tape drive, see

or refer to the White Papers on http://h18006.www1.hp.com/storage/tapewhitepapers.html.

For detailed instructions about enabling encryption please refer to the documentation supplied with

your backup application. This will also highlight any default states, for example when copying tapes,

that may need changing if using encrypted tapes.

WARNING!

Always remove the cartridge from the tape drive before you change the write protection.

If you want to protect the data on a cartridge from being altered or overwritten, you can write protect the

cartridge.

•

To write protect a cartridge, push the switch to the right to prevent any data recording on the

cartridge. Note the padlock on the tab that indicates that the cartridge is protected.

•

To write enable a cartridge, push the switch to the left to allow data recording on the cartridge.

Figure 33

Use the correct media

http://h18006.www1.hp.com/products/storageworks/lto4Encryp/index.html

on page 63 illustrates the location of the write-protect tab.

Table of Contents

Show Quick Links

Table of Contents