TIER#n(MB)
This displays the capacity (MB) assigned to each tier.
raidcom initialize ldev
Formats LDEVs.
The operation that can be specified is Quick Format, Normal Format, and Shredding.
A device group can also be specified instead of an LDEV.
This command is executed asynchronously with the command input. Check the completion of this
process on the raidcom get command_status command.
Syntax
raidcom initialize ldev {-ldev_id <ldev#> | -grp_opt <group option>
-device_grp_name <device group name> [<device name>]} -operation <type>
Options and parameters
Option
-ldev_id <ldev#>
-grp_opt <group
option>
-device_grp_name
<device group name>
[<device name>]
-operation <type>
Examples
Performing Quick Format for a LDEV: 200.
raidcom initialize ldev -operation qfmt -ldev_id 200
Performing Quick Format for an LDEV belonging to the device group: grp1.
raidcom initialize ldev -operation qfmt -grp_opt ldev -device_grp_name grp1
Performing Normal Format for an LDEV: 200.
raidcom initialize ldev -operation fmt -ldev_id 200
Performing Shredding (Pattern: 0x55aa55aa) for an LDEV: 200.
raidcom initialize ldev -operation shrd 0x55aa55aa -ldev_id 200
Stopping Shredding for an LDEV: 200.
raidcom initialize ldev -operation stop ldev_id 200
raidcom modify ldev
Changes the LDEV attributes. What can be operated:
160 Configuration setting commands
Description
Specifies an LDEV number (0-65279).
For example:
-ldev_id 200
Specifies the device information extracted from the LDEV belonging to the device group. Specify
"ldev" (fixed). The information of LDEV belonging to the device group is used.
Specifies the name of device group (max. 32 characters) to be operated.
To operate an LDEV in the device group, specify the device name of LDEV (max. 2 characters)
within the device group.
If the device name is omitted, all the LDEVs belonging in the device group are operated.
Instructs the operation.
The following operation can be specified:
fmt: Normal Format
qfmt: Quick Format
shrd: Shredding