Xilinx MIcroBlaze Development Spartan-3E 1600E Kit User Manual page 37

R
The PROM Formatter then prompts for the name(s) of the FPGA configuration bitstream
file. As shown in
(*.bit). Choose No after selecting the last FPGA file. Finally, click OK to continue.
When PROM formatting is complete, the iMPACT software presents the present settings
by showing the PROM, the select FPGA bitstream(s), and the amount of PROM space
consumed by the bitstream.
bitstream stored in an XCF04S Platform Flash PROM.
MicroBlaze Development Kit Spartan-3E 1600 Edition User Guide
UG257 (v1.1) December 5, 2007
Programming the FPGA, CPLD, or Platform Flash PROM via USB
Figure 4-18, click OK to start selecting files. Select an FPGA bitstream file
Figure 4-18: Enter FPGA Configuration Bitstream File(s)
Figure 4-19 shows an example for a single XC3S500E FPGA
UG257_4-18_060906
35
www.xilinx.com