Xilinx MIcroBlaze Development Spartan-3E 1600E Kit User Manual page 34

Chapter 4: FPGA Configuration Options
To regenerate the programming file, double-click Generate Programming File, as
shown in
Generating the PROM File
After generating the program file, double-click Generate PROM, ACE, or JTAG File
to launch the iMPACT software, as shown in
After iMPACT starts, double-click PROM File Formatter, as shown in
32
www.xilinx.com
Figure 4-12.
Figure 4-12: Double-Click Generate Programming File
Figure 4-13: Double-Click Generate PROM, ACE, or JTAG File
MicroBlaze Development Kit Spartan-3E 1600 Edition User Guide
UG257_04_12_022706
Figure 4-13.
UG257_04_13_061206
UG257 (v1.1) December 5, 2007
R
Figure 4-14.