Single-User Mode Hp-Ux Booting; Booting Hp-Ux In Single-User Mode (Efi Shell) - HP Integrity rx2620 User's & Service Manual

4. When accessing the EFI System Partition for the desired boot device, issue the
HPUX command to initiate the HPUX.EFI loader on the device you are accessing.
The full path for the loader is \EFI\HPUX\HPUX.EFI. When initiated, the loader
references the \EFI\HPUX\AUTO file and proceeds to boot HP-UX using the
default boot behavior specified in the AUTO file.
You have 10 seconds to interrupt the automatic booting of the default boot
behavior. Pressing any key during this 10-second period stops the HP-UX boot
process and enables you to interact with the HPUX.EFI loader. To exit the loader
(the HPUX> prompt) enter exit (this returns you to the EFI Shell).
To boot the HP-UX operating system, do not enter anything during the 10-second
period given for stopping at the HPUX.EFI loader.
Shell> map
Device mapping table
fs0 : Acpi(000222F0,269)/Pci(0|0)/Scsi(Pun8,Lun0)/HD(Part1,Sig72550000)
blk0 : Acpi(000222F0,269)/Pci(0|0)/Scsi(Pun8,Lun0)
blk1 : Acpi(000222F0,269)/Pci(0|0)/Scsi(Pun8,Lun0)/HD(Part1,Sig72550000)
blk2 : Acpi(000222F0,269)/Pci(0|0)/Scsi(Pun8,Lun0)/HD(Part2,Sig72550000)
blk3 : Acpi(000222F0,2A8)/Pci(0|0)/Scsi(Pun8,Lun0)
blk4 : Acpi(000222F0,2A8)/Pci(0|1)/Scsi(Pun2,Lun0)
Shell> fs0:
fs0:\> hpux
(c) Copyright 1990-2002, Hewlett Packard Company.
All rights reserved
HP-UX Boot Loader for IA64
Press Any Key to interrupt Autoboot
\efi\hpux\AUTO ==> boot vmunix
Seconds left till autoboot -
5. Exit the console and iLO MP interfaces when finished.
To exit the server console and return to the iLO MP Main Menu, enter Ctrl+B.
To exit the iLO MP, enter X at the Main Menu.

Single-User Mode HP-UX Booting

Use the following procedure to boot HP-UX in single-user mode.

Booting HP-UX in Single-User Mode (EFI Shell)

From the EFI Shell environment, boot in single-user mode by stopping the boot process
at the HPUX.EFI interface (the HP-UX Boot Loader prompt, HPUX>) and entering the
boot -is vmunix command.
1. Access the EFI Shell environment for the system on which you want to boot
HP-UX in single-user mode.
a. To access the server console, log in to iLO and enter CO.
b. When accessing the console, confirm that you are at the EFI Boot Manager
menu (the main EFI menu). If you are at another EFI menu, choose Exit
from the submenus until you return to the screen with the EFI Boot Manager
heading.
c. To access the EFI Shell environment, choose EFI Shell from the EFI Boot
Manager menu.
2. Access the EFI System Partition (fsX: where X is the file system number) for
the device from which you want to boot HP-UX.
Revision 1.723
9
120