Event List Error Messages; Introduction To Event List Error Messages; A Cpu Power Module (System Board, Socket X); Asr Lockup Detected: Cause - HP ProLiant DL388 Troubleshooting Manual

Hp proliant servers troubleshooting guide
Hide thumbs Also See for ProLiant DL388:
Table of Contents

Advertisement

Event list error messages

Introduction to event list error messages

This section contains event list error messages recorded in the IML
77), which can be viewed through different tools.
The format of the list is different when viewed through different tools. An example of the format of an event
as displayed on the IMD follows:
**001 of 010**
---caution---
03/19/2002
12:54 PM
FAN INSERTED
Main System
Location:
System Board
Fan ID: 03
**END OF EVENT**
WARNING:
information in the server documentation before removing, replacing, reseating, or modifying
system components.
IMPORTANT:
apply to the server you are troubleshooting. Refer to the server documentation for information on
procedures, hardware options, software tools, and operating systems supported by the server.
NOTE:
the server.

A CPU Power Module (System Board, Socket X)...

...A CPU Power Module (Slot X, Socket Y) Failed
Event Type: Power module failure
Action: Replace the power module. In the case of an embedded power module, replace the system board.

ASR Lockup Detected: Cause

Event Type: System lockup
Action: Examine the IML
For more information, refer to the HP ROM-Based Setup Utility User Guide on the server Documentation CD
or the SmartStart Support and Documents website
(http://www.hp.com/support/smartstart/documentation).
To avoid potential problems, ALWAYS read the warnings and cautionary
This guide provides information for multiple servers. Some information may not
The error messages in this section may be worded slightly different than as displayed by
("Integrated Management
("Integrated Management
Log" on page 77) to determine the cause of the lockup.
Log" on page
Error messages 159

Advertisement

Table of Contents
loading

Table of Contents