Download Print this page

HP ProLiant DL388 Troubleshooting Manual: Storage Enclosure On Scsi Bus X Indicated That The Fan Is Degraded; Storage Enclosure On Scsi Bus X Indicated That The Fan Module Is Unplugged

Hp proliant servers troubleshooting guide.
Hide thumbs

Advertisement

Description: The cooling fan located in the external storage unit has failed.
Action: Replace the fan.

Storage Enclosure on SCSI Bus X Indicated that the Fan is Degraded...

...SOLUTION: this condition usually occurs on enclosures with multiple fans and one of those fans has failed. Replace
any fans not operating properly.
Description: One or more fans in the external storage unit have failed.
Action: Replace the failed fans.

Storage Enclosure on SCSI Bus X Indicated that the Fan Module is Unplugged...

...SOLUTION: Make sure the fan module is properly connected.
Description: A fan in the external storage unit is not connected properly.
Action: Check and reseat all fan connections securely.
Storage Enclosure on SCSI Bus X - Wide SCSI Transfer Failed...
...SOLUTION: This may indicate a bad SCSI cable on bus X. Try replacing the cable.
Description: A cable on bus X has failed.
Action:
Replace the failed cable.
1.
If the problem persists, contact an authorized service provider.
2.
Swapped cables or configuration error detected. A configured array of drives...
...was moved from another controller that supported more drives than this controller supports.
SOLUTION: Upgrade the firmware on this controller. If this doesn't solve the problem, then power down system and
move the drives back to the original controller.
Description: You have exceeded the maximum number of drives supported for this controller, and the
connected controller was not part of the original array configuration.
Action:
Update the controller to the latest firmware version
1.
If the problem persists:
2.
Replace this controller with the original controller.
or
Replace this controller with a new controller that supports the number of drives in the array.
Swapped Cables or Configuration Error Detected. A Drive Rearrangement...
...was attempted while an expand operation was running. This is an unsupported operation.
SOLUTION: Power down system then move drives back to their original location. Power on system and wait for the
expand operation to complete before attempting a drive rearrangement.
Description: One or more drive locations were changed while an expand operation was in progress.
Action:
Power down the server.
1.
("Firmware
maintenance" on page 81).
Error messages 107

Advertisement

Troubleshooting

   Also See for HP ProLiant DL388

   Related Manuals for HP ProLiant DL388

   Related Content for HP ProLiant DL388

Comments to this Manuals

Symbols: 0
Latest comments: