400 Series - HP ProLiant DL388 Troubleshooting Manual

Hp proliant servers troubleshooting guide
Hide thumbs Also See for ProLiant DL388:
Table of Contents

Advertisement

303-Keyboard Controller Error
Audible Beeps: None
Possible Cause: System board, keyboard, or mouse controller failure occurred.
Action:
Be sure the keyboard and mouse are connected.
1.
CAUTION:
board. If you believe the system board requires replacement, contact HP Technical Support
("Contacting
Run Insight Diagnostics
2.
indicated.
304-Keyboard or System Unit Error
Audible Beeps: None
Possible Cause: Keyboard, keyboard cable, mouse controller, or system board failure.
Action:
Be sure the keyboard and mouse are connected.
1.
CAUTION:
board. If you believe the system board requires replacement, contact HP Technical Support
("Contacting
Run Insight Diagnostics
2.
indicated.

400 Series

40X-Parallel Port X Address Assignment Conflict
Audible Beeps: 2 short
Possible Cause: Both external and internal ports are assigned to parallel port X.
Action: Run the server setup utility and correct the configuration.
404-Parallel Port Address Conflict Detected...
...A hardware conflict in your system is keeping some system components from working correctly. If you have recently
added new hardware remove it to see if it is the cause of the conflict. Alternatively, use Computer Setup or your
operating system to insure that no conflicts exist.
Audible Beeps: 2 short
Possible Cause: A hardware conflict in the system is preventing the parallel port from working correctly.
Action:
If you have recently added new hardware, remove it to see if the hardware is the cause of the conflict.
1.
Run the server setup utility to reassign resources for the parallel port and manually resolve the resource
2.
conflict.
Only authorized technicians trained by HP should attempt to remove the system
HP" on page 177) before proceeding.
("HP Insight
Diagnostics" on page 76) and replace failed components as
Only authorized technicians trained by HP should attempt to remove the system
HP" on page 177) before proceeding.
("HP Insight
Diagnostics" on page 76) and replace failed components as
Error messages 134

Advertisement

Table of Contents
loading

Table of Contents