HP ProLiant DL388 Troubleshooting Manual page 128

Hp proliant servers troubleshooting guide
Hide thumbs Also See for ProLiant DL388:
Table of Contents

Advertisement

102-System Board Failure, DMA Test Failed
Audible Beeps: None
Possible Cause: 8237 DMA controllers, 8254 timers, and similar devices.
CAUTION:
board. If you believe the system board requires replacement, contact HP Technical Support
("Contacting
Action: Contact an authorized service provider for system board replacement.
102-System Board Failure, Timer Test Failed
Audible Beeps: None
Possible Cause: 8237 DMA controllers, 8254 timers, and similar devices.
CAUTION:
board. If you believe the system board requires replacement, contact HP Technical Support
("Contacting
Action: Contact an authorized service provider for a system board replacement.
104-ASR Timer Failure
Audible Beeps: None
Possible Cause: System board failure.
CAUTION:
board. If you believe the system board requires replacement, contact HP Technical Support
("Contacting
Action: Run Insight Diagnostics
indicated.
162-System Options Not Set
Audible Beeps: 2 long
Possible Cause: Configuration is incorrect. The system configuration has changed since the last boot
(addition of a hard drive, for example) or a loss of power to the real-time clock has occurred. The real-time
clock loses power if the onboard battery is not functioning correctly.
Action: Press the F1 key to record the new configuration. Run the server setup utility to change the
configuration. If this message persists, you may need to replace the onboard battery.
163-Time & Date Not Set
Audible Beeps: 2 long
Possible Cause: Invalid time or date in configuration memory.
Action: Run the server setup utility and correct the time or date.
Only authorized technicians trained by HP should attempt to remove the system
HP" on page 177) before proceeding.
Only authorized technicians trained by HP should attempt to remove the system
HP" on page 177) before proceeding.
Only authorized technicians trained by HP should attempt to remove the system
HP" on page 177) before proceeding.
("HP Insight
Diagnostics" on page 76) and replace failed components as
Error messages 128

Advertisement

Table of Contents
loading

Table of Contents