Series - HP ProLiant DL388 Troubleshooting Manual

172-1-Configuration Non-volatile Memory Invalid
Audible Beeps: None
Possible Cause: Nonvolatile configuration corrupted.
Action: Run the server setup utility and correct the configuration.
180-Log Reinitialized
Audible Beeps: None
Possible Cause: The IML
of the log.
Action: Event message, no action is required.

200 Series

201-Memory Error
Audible Beeps: None
Possible Cause: Memory failure detected.
Action: Run Insight Diagnostics
indicated.
203-Memory Address Error
Audible Beeps: None
Possible Cause: Memory failure detected.
Action: Run Insight Diagnostics
indicated.
207 - Invalid Memory Configuration Detected. DIMMs installed when no
corresponding processor is detected.
Description: Processor is required to be installed for memory to be used.
Action:
CAUTION:
"Performing processor procedures in the troubleshooting process (on page 17)." Failure to follow
the recommended guidelines can cause damage to the system board requiring replacement of the
system board.
Populate the processor socket or remove the DIMM.
("Integrated Management
("HP Insight Diagnostics" on page 76) and replace failed components as
("HP Insight Diagnostics" on page 76) and replace failed components as
Before installing any processors, be sure to follow the guidelines provided in
Log" on page 77) has been reinitialized due to corruption
Error messages 129