Download Print this page

HP ProLiant DL388 Troubleshooting Manual: Power Management Module Error Codes

Hp proliant servers troubleshooting guide.
Hide thumbs

Advertisement

For more information, refer to the HP BladeSystem Maintenance and Service Guide on the HP website
(http://www.hp.com/products/servers/proliant-bl/p-class/info).
Replace the interconnect module.
3.
For more information, refer to the HP BladeSystem Maintenance and Service Guide on the HP website
(http://www.hp.com/products/servers/proliant-bl/p-class/info).
Unknown server blade management module error code
LED code: 19-1
Location: Unknown
Action: Perform the following steps to resolve the problem. Stop when the problem is resolved.
Press the server blade management module reset button.
1.
Replace the server blade management module.
2.

Power management module error codes

Power supply error codes
Location
Power Supply - Slot 1
Power Supply - Slot 2
Power Supply - Slot 3
Power Supply - Slot 4
Power Supply - Slot 5
Power Supply - Slot 6
Action: Perform the following steps to resolve the problem. Stop when the problem is resolved.
Reseat the power supply.
1.
For more information, refer to the HP BladeSystem Maintenance and Service Guide on the HP website
(http://www.hp.com/products/servers/proliant-bl/p-class/info).
Reseat the power management module.
2.
Replace the power supply.
3.
Power management module board error codes
LED code: 7-1, 7-2, 7-3, 7-4, 7-5, 7-6, 7-7, 7-8, 7-9, 7-10, 7-11, 7-12, or 7-13
Location: Power management board
Action: Perform the following steps to resolve the problem. Stop when the problem is resolved.
Reseat the power management module.
1.
Replace the power management module.
2.
Power management module backplane error codes
LED code: 8-1, 8-2, 8-3, 8-4, 8-5, 8-6, 8-7, or 8-8
Location: Power management backplane
LED codes
1-1 or 1-2
2-1 or 2-2
3-1 or 3-2
4-1 or 4-2
5-1 or 5-2
6-1 or 6-2
Error messages 166

Advertisement

Troubleshooting

   Also See for HP ProLiant DL388

   Related Manuals for HP ProLiant DL388

Comments to this Manuals

Symbols: 0
Latest comments: