Server Updates With An Hp Trusted Platform Module And Bitlocker™ Enabled - HP ProLiant DL388 Troubleshooting Manual

Online/activity
LED (green)
On
On
Flashing regularly
(1 Hz)
Flashing regularly
(1 Hz)
Flashing irregularly Amber, flashing
Flashing irregularly Off
Off
Off
Off
Server updates with an HP Trusted Platform Module
and BitLocker™ enabled
When a TPM is installed and enabled in RBSU, and when the Microsoft® Windows® BitLocker™ Drive
Encryption feature is enabled, always disable BitLocker™ before performing any of the following
procedures:
•
Restarting the computer for maintenance without a PIN or startup key
•
Updating firmware (on page 83)
•
Upgrading critical early boot components
•
Upgrading the system board to replace or remove the TPM
•
Disabling or clearing the TPM
•
Moving a BitLocker™-protected drive to another server
•
Adding an optional PCI device, such as a storage controller or network adapter
Interpretation
Fault/UID LED
(amber/blue)
Amber, flashing A predictive failure alert has been received for this drive.
regularly (1 Hz) Replace the drive as soon as possible.
Off The drive is online, but it is not active currently.
Amber, flashing Do not remove the drive. Removing a drive may terminate the
regularly (1 Hz) current operation and cause data loss.
The drive is part of an array that is undergoing capacity expansion
or stripe migration, but a predictive failure alert has been received
for this drive. To minimize the risk of data loss, do not replace the
drive until the expansion or migration is complete.
Off Do not remove the drive. Removing a drive may terminate the
current operation and cause data loss.
The drive is rebuilding, erasing, or it is part of an array that is
undergoing capacity expansion or stripe migration.
The drive is active, but a predictive failure alert has been received
regularly (1 Hz) for this drive. Replace the drive as soon as possible.
The drive is active, and it is operating normally.
Steadily amber A critical fault condition has been identified for this drive, and the
controller has placed it offline. Replace the drive as soon as
possible.
Amber, flashing A predictive failure alert has been received for this drive. Replace
regularly (1 Hz) the drive as soon as possible.
Off The drive is offline, a spare, or not configured as part of an array.
Common problem resolution 22