A Event, Error, And Warning Messages; Efi Error And Warning Messages - HP Integrity rx1620 Operation Manual

A Event, Error, and Warning Messages

This appendix contains event, error and warning information for the hp Integrity rx1620 Server
system:
• Extensible Firmware Interface (EFI) error and warning messages
• System Event Log (SEL) and Forward Progress Log (FPL) Entries

EFI Error and Warning Messages

EFI error and warning messages are displayed on the console as part of the boot process. They
can also be retrieved via the info warningsEFI command.
Table A-1 EFI Error and Warning Messages
Error Error/Warning Message
Number
2 Insufficient resources to assign to one or more I/O
devices
4 Unexpected hardware I/O configuration
7 No Baseboard Management Controller (BMC)
installed in platform
8 BMC cannot be accessed
9 One or more BMC ports failed
10 BMC system event log is full
11 Platform SCR is bad
12 Set time to BMC SEL failed
13 SEL get info failed
14 Initial BMC SEL event failed
15 Update of BMC buffered data failed
16 All Advanced Configuration and Power Interface
(ACPI) BMC ports bad
17 Read error on BMC token
18 BMC token transmit checksum error
19 Error writing BMC token on download
20 Non-Volatile Memory (NVM) token access error
21 BMC token write error during NVM write through
22 Error reading BMC token on upload to NVM
Solution
Incorrect I/O configuration. Contact the HP
Support center for assistance.
Incorrect I/O configuration. Contact the HP
Support center for assistance.
Ensure the BMC ROM is installed; update BMC
firmware
Check system logs for errors. Replace the base
unit.
Communication with the BMC failed. Check
power. Replace the base unit.
Clear SEL
Contact the HP Support center for assistance.
Communication with the BMC failed. Replace
the base unit.
Communication with the BMC failed. Replace
the base unit.
Communication with the BMC failed. Replace
the base unit.
Communication with the BMC failed. Replace
the base unit.
Communication with the BMC failed. Replace
the base unit.
Communication with the BMC failed. Replace
the base unit.
Communication with the BMC failed. Replace
the base unit.
Communication with the BMC failed. Replace
the base unit.
Communication with the BMC failed. Replace
the base unit.
Communication with the BMC failed. Replace
the base unit.
Communication with the BMC failed. Replace
the base unit.

EFI Error and Warning Messages

101