Show Rmon Channel - Enterasys N Standalone (NSA) Series Configuration Manual

11.2.4.27 show rmon channel

Use this command to display RMON channel entries for one or more ports.
show rmon channel [port-string]
Syntax Description
port-string
Command Defaults
If port-string is not specified, information about all channels will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display RMON channel information for fe.2.12:
Matrix(rw)->show rmon channel fe.2.12
Port fe.2.12
----------------------------------------------------------
Control
OnEventIndex
EventIndex
Matches
Description
Owner
Logging And Network Management Command Set
(Optional) Displays RMON channel entries for a specific
port(s).
Channel index= 628
off AcceptType
0 OffEventIndex
0 Status
4498
Thu Dec 16 12:57:32 EST 2004
NetSight smith
Matrix NSA Series Configuration Guide
Configuring RMON
EntryStatus= valid
matched
0
ready
11-85