Q Vlan Static Table Configuration - Enterasys Vertical Horizon VH-2402S2 Configuration Manual

802.1Q VLAN Static Table Configuration

Use this screen to create a new VLAN or modify the settings for an
existing VLAN. You can add/delete port members for a VLAN from any
unit in the stack, or prevent a port from being automatically added to a
VLAN via the GVRP protocol. (Also, note that all ports can only belong to
one untagged VLAN. This is set to VLAN 1 by default, but can be changed
via the Port Assignment VLAN Configuration screen on page 48.)
Unit Egress Ports
1 111111111111 111111111111 110-
Unit Untagged Ports
1 111111111111 111111111111 110-
<APPLY>
Use <TAB> or arrow keys to move, other keys to make changes.
Figure 2-40. 802.1Q VLAN Static Table Configuration
Parameter
VID
VLAN Name
Status
Unit
Egress Ports
Forbidden Egress
Ports
Untagged Ports
[Show]
[More]
[New]
9033820-03
Vertical Horizon Stack Local Management
802.1Q VLAN Static Table Configuration
VID VLAN Name
------------------------------
1
<OK> <CANCEL>
Description
The ID for the VLAN currently displayed. Range: 1-2048
A user-specified symbolic name for this VLAN.
String length: Up to 8 alphanumeric characters
Sets the current editing status for this VLAN as:
Not in Service, Destroy, or Active.
Stack unit.
Set the entry for any port in this field to "1" to add it to the displayed
VLAN, or "0" to remove it from the VLAN.
Prevents a port from being automatically added to this VLAN via
GVRP.
Set the entry for any port in this field to "1" to add it to the displayed
VLAN as an untagged port.
Displays settings for the specified VLAN.
Displays consecutively numbered VLANs.
Sets up the screen for configuring a new VLAN.
Status
Active
Forbidden Egress Ports
000000000000 000000000000 000-
VID : 1
[Show]
[More]
[New]
<PREV UNIT>
VH-2402S2 User Interface 53
<NEXT UNIT>