Service; Repairs; Operating Panel Replacement - Beisler 2110-5 Working Instructions

Short Seam Automat 2110-5 / 2111-5 Working Instructions
C.5
C.5.4 Repairs
Any repairs to the machine must only be carried out by:
• authorized Technical Service,
• personnel that has been instructed about the setting
up and maintenance of the machine on the occasion
of a training by the supplier or manufacturer.
Use only original spare parts for installing or replacing
machine components.
Manufacturer and supplier will not be held responsible for
spare parts from third parties.
NOTE - Programming instructions!
Repairs require that machine components carry out their
individual movements and that the machine movements
are tested. These functions are controlled on level 1 of the
service menu.
For the necessary instructions, please refer to the pro-
gramming instructions section D.

Operating panel replacement:

1. Disconnect machine from power supply.
2. Fig. 5: Remove two lock screws
terface connector
3. Remove operating panel
secure using screws.
4. Install the sewing programs: Insert memory stick
into slot (see Section D, Programming instruc-
tions).
Maintenance
and disconnect in-
.
, install new panel and
Fig. 5
- C 37 -
Beisler Automated Sewing Equipment
Fig. 5