Activating Additional Seam Numbers; Deactivating A Seam Number; Operating The Stacker; Setting The Thread Clamp Manually - Beisler 2110-5 Working Instructions

Short Seam Automat 2110-5 / 2111-5 Working Instructions
B.3
B.3.4 Activating additional seam numbers
1. Select seam number of desired seam.
Move cursor to seam number:
• Press or
Confirm selection:
• Press key.
The seam number of the activated seam appears blacke-
ned.
B.3.5 Deactivating a seam number
1. Select seam number of desired seam.
Move cursor to seam number:
• Press or
Confirm selection:
• Press key.
The seam number of the deactivated seam is no longer
blackened.
B.3.6 Operating the stacker
To ensure easy access to the sewing pieces on the stacker,
the lift table can be lowered, and the sliding table can be
moved backward.
1. Lower or raise the lift table.
• Press key.
2. Move sliding table forward or backward.
• Press key.
Operation
key.
key.
B.3.7 Setting the thread clamp manually
Before the first start of a sewing program, the top thread
clamp must be activated to protect the top thread from
being pulled out of the needle when the machine starts.
• Press key.
B.3.8 Resetting the day counter to zero
Use this function to reset the day counter for a program
cycle or for a completed working cycle to zero.
1. Move to level 1.
Press key.
The display shows the symbols for selectable functions
on this level.
2. Request the day counter reset function.
• Press key.
The day counter is now reset to zero.
3. Return to start level.
Press key.
Display: PART: 0000
- B 23 -
Beisler Automated Sewing Equipment