Selecting The Sewing Program - Beisler 2110-5 Working Instructions

Beisler Automated Sewing Equipment
B.3
B.3.3 Selecting the sewing program
After the machine has been switched on and the control
program has been booted, the display
rating panel shows the most recently selected sewing
program.
Sewing programs are stored in the memory (M). The
program control memory can store up to 50 sewing pro-
grams (M 01-M 50).
Fig. 10: For each sewing program, up to six seam
numbers (01, 02, 03, 04, 05, 06) can be assigned.
The six seams differ only in their control functions (see
Section D.2.1, Program structure).
The program control of the machine is equipped at the
factory with a standard program:
• Sewing program M 01 with six different seams for auto-
matic crimping over of pocket edges and the tucking of
pocket edges to pocket bags.
1. Select sewing program at operating panel.
Request memory:
• Press key.
Select sewing program number, e.g. 01:
• Press and
The selected program is activated immediately.
2. Select seam number of desired seam.
Move cursor to seam number:
• Press or
Confirm selection:
• Press key.
Fig. 11: Display during seam number selection:
Active seam number
Passive seam number
Seam number is selected
Operation
on the ope-
keys.
key.
Short Seam Automat 2110-5 / 2111-5 Working Instructions
Fig. 10
Fig. 11
- B 22 -
Fig. 10/11