Transport And Sewing - Beisler 2110-5 Working Instructions

Short Seam Automat 2110-5 / 2111-5 Working Instructions
B.2
B.2.3 Transport and sewing
Folder
The folder moves to the left with the pocket edge,
is lowered and puts the pocket edge onto the pocket
bag.
Pocket bag clamp
The pocket bag clamp
working plate until the main clamp picks up the sewing
pieces and transports them to the sewing head. The
pocket bag clamp closes while the folder moves to the
left.
Automatic label feed system (optional),
The automatic label feed system positions folded labels
on the pocket edge.
Main clamp
The main clamp moves to the inserting station and
picks up the sewing pieces. The folder moves back up
to its start position.
The main clamp pushes the sewing piece on the wor-
king plate from the inserting station to the sewing head.
Fig. 6
Functions of the machine
fixes the pocket bag to the
Sewing head
The sewing head
stitch and thread cutting. All other functions, such
as seam length or determining the beginning and the end
of the seam, are acquired by the sensor system and
controlled by the program control unit in accordance
with the set values.
Thread supply and thread feeding are monitored by
sensors (top thread monitor and bobbin rest thread mo-
nitor).
The reel stand can hold two reels.
Transport stamp
After tucking, the sewing piece is blown even and trans-
ferred by the transport stamp
Stacker
The stacker consists of a sliding table
lift table . The sewing pieces are put down on the
sliding table of the stacker. The sliding table then moves
backward, and the sewing pieces
table where they are stacked.
The lift table is lowered automatically (photocell con-
trol) or is lowered in preset steps in accordance with
the input numbers.
- B 17 -
Beisler Automated Sewing Equipment
performs only the functions sewing
to the stacker.
Fig. 6
and a
fall onto the lift