Level 3 Special Parameters / Functions; Switching Photocell For Beginning Of Seam On Or Off; Switching Photocell For End Of Seam On Or Off; Switching Folder On Or Off - Beisler 2110-5 Working Instructions

Short Seam Automat 2110-5 / 2111-5 Workinging Instructions
D.3
D.3.7 Level 3 special parameters / Functions
Level 3 submenus:
F1 Back to start level
F2 Switch photocell for beginning of seam on or off
F3 Switch photocell for end of seam on or off
F4 Switch folder on or off
F5 Sliding table
F8 Request next level (level 4)

Switching photocell for beginning of seam on or off

If the photocell that scans the start position of the seam is
switched off, the machine control requires a fixed insertion
distance for machine operation. Therefore, switching off the
photocell results in a switch-over to a fixed insertion length
(see Fig. 4). This function is directly related to the photocell
correction functions of the service menu.
• Press key.
The alternating request of this function switches between
two modes:
Photocell for beginning of seam and fixed insertion di-
stance.

Switching photocell for end of seam on or off

If the photocell that scans the end position of the seam
is switched off, the machine control requires a fixed point
for the end of the seam to ensure correct machine ope-
ration. Therefore, switching off the photocell results in a
switch-over to a fixed end of seam point. This function is
directly related to the photocell correction functions of the
service menu.
• Press key.
The alternating request of this function switches between
two modes:
Photocell for end of seam and fixed end of seam point or
fixed seam length.
Programming

Switching folder on or off

The folder puts the pocket edge onto the pocket bag. If
this function is disabled, the pocket edge must be put onto
the pocket bag manually.
• Press key.

Switching sliding table on or off

If this function is enabled, the pocket edge will not be sta-
cked after end of the seam.
Transportation / sliding / lift table are out of function.
• Press key.
- D 79 -
Beisler Automated Sewing Equipment