Entering Seam Names; Copying Sewing Programs To The Memory Stick; Loading Sewing Programs From The Memory Stick - Beisler 2110-5 Working Instructions

Short Seam Automat 2110-5 / 2111-5 Workinging Instructions
D.3
D.3.1 System menu
• Press key (erase seam).
• Enter seam number using numeric keypad.
Confirm safety prompt, press
NOTE - Deleting seam numbers!
If a seam number is deleted, it is removed from all sewing
programs into which it had been inserted.

Entering seam names

A sewing program can be named using plain text.
Request sewing program.
• Press key.
• Press key (init parameters).
• Press key (enter seam name).
• Use the numeric keypad to enter numbers or text. To
enter letters, hold the required color-coded function key
depressed and press the corresponding color-coded
number key for the letter on the numeric keypad. To
enter blanks between text or number combinations,
press the LEFT or RIGHT arrow key.
Delete letter:
• Press key four times.
Confirm input, exit menu:
• Press key.
Programming
key.

Copying sewing programs to the memory stick

Programmed sewing programs can be copied to the
memory stick (back-up copies).
Select sewing program.
• Insert memory stick into USB slot.
• Press key.
• Press key (init parameters).
Machine < -- > Stick.
• Pess
Active seam -- > Memory stick.
• Press
• Enter seam number using numeric keypad.

Loading sewing programs from the memory stick

To reestablish or to change seams, sewing programs can
be loaded from the memory stick by overwriting an existing
location or selecting an unused location.
• Insert memory stick into USB slot.
• Press key.
• Press key (init parameters).
Machine < -- > Stick.
• Pess
key Stick -- > Active seam.
• Press
• Enter sewing program and seam number using numeric
keypad.
- D 65 -
Beisler Automated Sewing Equipment