Beisler Automated Sewing Equipment
B.2
B.2.1 Functional sequence
The short seam automat 2110-5 / 2111-5 allows the au-
tomatic crimping over of pocket edges and the tucking of
pocket edges to pocket bags. The complete machine ope-
ration is performed using the following operational steps:
•
Pocket edge and pocket bag are positioned manu-
ally.
•
The pocket edge is crimped over and picked up.
•
The folder transports the pocket edge to the pocket bag.
•
The transport system automatically transports the pok-
ket edge and the pocket bag to the sewing head where
they are tucked.
•
The finished piece is transported to the stacking table
by the stacking system and put down.
B.2.2 Line-up and alignment
Fig. 3: Depending on how the pocket edge and the po-
cket bag are to be sewn to one another, the two pieces
must be aligned at the line-up positions. The exact line-up
position of the edge to the bag can be marked at the wor-
king plate or at the pick-up plate using tape or pen. Please
note that the pocket bag
the operating range of the pocket bag clamp
Fig. 2: Handwheel for fabric thickness,
The handwheel
is used to set the maximal fabric
thickness of the pocket edge. It can be adjusted step-
lessly.
Fig. 2: Handwheel for stitch width,
The handwheel
width for the pocket edge. The stitch width depends on
the thickness of the fabric. The thicker the fabric, the lar-
ger the stitch width.
Fig. 3: Line-up position for pocket edge,
The pocket edge
is lined up at the stop rail
pick-up plate
. The exact alignment to the pocket
bag
is marked by a marking
(see fig. 4 too).
Functions of the machine
must be lined up within
is used to set the correct stitch
at the pick-up plate
Short Seam Automat 2110-5 / 2111-5 Working Instructions
Fig. 2
.
Fig. 3
of the
- B 14 -
Fig. 2/3