Compressed Air Connections - Beisler 2110-5 Working Instructions

Beisler Automated Sewing Equipment
C.3
C.3.2 Compressed air connections
Fig. 3: The compressed air connection is preinstalled on
the machine. It comprises the following components:
• Pressure reducer
separator ,
• Pressure hose with push-in plug
The pressure reducer is installed at the side mounting wall
of the worktable.
Connecting the machine to the compressed air sup-
ply system:
1. Connect pressure hose plug to on-site terminal unit.
2. Open on-site compressed air supply.
3. Set pressure reducer to a machine operating pressure
of 6 bar by rotating pressure reducer knob
value on manometer
• To increase pressure, rotate in clockwise direction.
• To reduce pressure, rotate in counter-clockwise di-
rection.
Start-up
with manometer and water
.
and read
:
Short Seam Automat 2110-5 / 2111-5 Working Instructions
Fig. 3
- C 32 -
Fig. 3