Folder To Clamp Rail Alignment - Beisler 2110-5 Working Instructions

Short Seam Automat 2110-5 / 2111-5 Working Instructions
C.5
C.5.5 Machine set-up

Folder to clamp rail alignment:

The lowered folder must be absolutely parallel to and in
slight contact with the clamp rail along its entire length.
Folder position adjustment:
1. Move main clamp to position using input/output con-
trol functions:
• Move main clamp to front stop point.
• Lower main clamp.
2. Move folder to position using input/output control func-
tions:
• Rotate folder.
• Close folder clamp.
• Lower folder.
3. Fig. 14: Check parallel alignment of folder clamp
to clamp rail . To change the folder clamp alignment:
4. Loosen lock screw
5. Rotate folder clamp bracket
6. Tighten lock screw
Maintenance
.
to parallel position.
.
Fig. 14
- C 43 -
Beisler Automated Sewing Equipment
Fig. 14