Beisler Automated Sewing Equipment
D.3
D.3.5 List of special parameters
Special parameters are values that refer to only one
specific sewing program. Changes of these values affect
only the currently selected sewing program for which the
setting is made.
Special parameters are edited in four different levels (level
2 to level 5).
Special parameters can be functions that may be enab-
led or disabled or parameter values that are set in lists.
No.
CLAMP POSITION RIGHT:
01
Clamp position right during piece transfer
FOLDER SWING RELEASE
Sewing folder
02
Input of distance (in mm) after which folder swings right after beginning of insertion,
Default 120 mm
INSERT SPEED .........:
03
Clamp insertion speed
CLAMP SPEED ..........:
04
Clamp transport speed
WAITING POSITION:
05
Waiting position of the clamp
SEWING SPEED 1 .......:
06
Sewing speed 1 beginning of seam
SEWING SPEED 2 .......:
07
Sewing speed 2 main seam
SEWING SPEED 3 .......:
08
Sewing speed 3 end of seam
DISTANCE SEWING SPEED 1:
09
Distance for slow sewing (sewing speed 1)
DISTANCE SEWING SPEED 3:
10
Distance for slow sewing at end of seam (sewing speed 3)
THREAD MONITOR ON AFTER:
12
Top thread monitor on (distance in mm after beginning of seam)
TOP THREAD MON. FILTER:
13
Filter for top thread monitor (response delay)
BOTTOM THREAD MON. FILTER:
14
Filter for bottom thread monitor (response delay)
TACKING LENGTH SEAM BEG:
16
Initial bar tack length only for lock stitch
Programming
Programmable special parameters in lists (F3)
Short Seam Automat 2110-5 / 2111-5 Workinging Instructions
Request / exit special parameter menu
Select sewing program and change from start level to level 1:
•
Press
key.
Request special parameter menu:
•
Pess
key and request submenu.
Exit menu:
•
Press
key.
- D 76 -