Filling Spool; Resetting The Insertion Process - Beisler 2110-5 Working Instructions

Short Seam Automat 2110-5 / 2111-5 Workinging Instructions
D.3
D.3.2 Service menu start level

Filling spool

Insert thread and fill spool:
• Press key.
Acknowledge status messages on display:
If the message SPOOL EMPTY is displayed, insert a full
spool and
• Press key.
If the message SPOOL: 004 M is displayed when a full
spool is inserted
• Press key
• Press key
NOTE - Rest thread monitor sensitivity!
If the spool is empty and the display does not show a status
message, the photocell sensitivity must be adjusted (see
Section C, Service Instructions).
Programming

Resetting the insertion process

This function depends on the mode of machine operati-
on. It refers only to machine movements that can be per-
formed before the automatic operation.
The machine movements will be reset to start position.
• Press key (several times if required).
- D 69 -
Beisler Automated Sewing Equipment