Machine Set-Up; Guide Laser Adjustment - Beisler 2110-5 Working Instructions

Beisler Automated Sewing Equipment
C.5
C.5.5 Machine set-up
NOTE - Activating inputs /outputs!
To allow for testing machine movements or interval opera-
tion, the individual stages of movement can be activated with
the inputs/outputs of the machine control unit (see pro-
gramming instructions, section D.3.3, service menu level 1).
Usually, the setting up of the machine is controlled by
parameter values of the sewing programs (special para-
meters) and the parameter values of the machine control
unit (global parameters). The following mechanical mo-
difications may be required additionally to ensure correct
seams with the set parameter values.

Guide laser adjustment:

The guide laser marks the line-up position of simple la-
bels on the pocket edge. The position of the guide laser
can be adjusted vertically and horizontally.
Fig. 9: Adjusting the bracket height:
1. Loosen lock screw
2. Position laser light bracket
3. Tighten lock screw
Horizontal adjustment:
1. Loosen lock screw
2. Rotate laser light
3. Tighten lock screw
Vertical adjustment for tilting the laser light into the desi-
red position:
1. Loosen lock screw
2. Rotate laser light angular bracket
tion.
3. Tighten lock screw
Maintenance
at rear of worktable.
in the desired height.
.
.
to desired position.
.
.
to desired posi-
.
Short Seam Automat 2110-5 / 2111-5 Working Instructions
Fig. 9
- C 40 -
Fig. 9