Folder Bar To Folder Clamp Alignment; Automatic Label Feed System Positioning - Beisler 2110-5 Working Instructions

Short Seam Automat 2110-5 / 2111-5 Working Instructions
C.5
C.5.5 Machine set-up

Folder bar to folder clamp alignment:

To ensure that the folder can crimp over the pocket edge
evenly, the folder clamp
above the folder bar
Folder bar adjustment:
1. Fig. 16: Fasten pick-up plate by rotating handwheel
completely to minus range.
Loosen retaining screw
worktable underside and reposition bracket
2. Tighten retaining screw.

Automatic label feed system positioning:

The position of the automatic label feed system at the in-
serting station can be changed by repositioning the bracket
of the automatic label feed system on the guide bar.
1. Fig. 17: Loosen bracket retaining screw
sition bracket on guide bar
2. Tighten retaining screw.
Maintenance
must pe positioned centrically
.
of folder bar bracket at the
and repo-
.
Fig. 16
.
Fig. 17
- C 45 -
Beisler Automated Sewing Equipment
Fig. 16/17