Clamp Rail Replacement - Beisler 2110-5 Working Instructions

Short Seam Automat 2110-5 / 2111-5 Working Instructions
C.5
C.5.4 Repairs

Clamp rail replacement:

The clamp rail must be replaced if the protective lining at
the bottom side of the rail is worn.
Clamp rail removal:
1. Fig. 8: Lift main clamp
2. Loosen retaining screw
3. Pull clamp rail down and remove.
Clamp rail installation:
1. Insert clamp rail into fixture
it reaches the stop. Make sure the clamp rail is positio-
ned evenly in the fixture.
2. Tighten retaining screw
Maintenance
.
.
and push up until
.
Beisler Automated Sewing Equipment
Fig. 8
- C 39 -
Fig. 8