Unpacking; Unpacking Of Printer - Brother HL-2600CN Service Manual

2.

UNPACKING

The package containing a printer weighs approximately 45kg, so it is too heavy for
one person to carry. It needs two adults to move the printer. Since the printer is a
precision machine, make sure that it is carried slowly with care so that no impact
occurs to the printer while moving it.
Do not attempt to lift a printer when it is covered by the vinyl bag because it is slippery
and may result in damage and injury if dropped.
2.1 Unpacking the Printer
Refer to Fig.3-2 on the next page.
1) Cut the P.P band (2 pieces).
2) Remove the plastic joints (4 locations).
3) Remove the outer box tape.
4) Open the top of the package and take the starter kit out.
5) Lift the outer box up from around the printer.
6) Remove the upper packing (4 locations).
7) Take out the power code.
8) Open up the polyethylene bag enclosing the printer.
9) Lift up the printer with another person's help, and move it away from the polyethylene
bag.
10) Remove the shipping tape (4 locations).
11) Remove the fixing tape of the silica gel the printer rear side.
12) Remove the silica gel.
WARNING
III-2