Brother HL-2600CN Service Manual page 243

4.2.17 FP2 Gear ASSY
1) Remove the set screws ST3X6 (2 pcs.) to remove the FP2 gear ASSY from the
frame.
4.2.18 Waste Toner Feeder (U) 2
Note:
The waste toner feeder (L) is composed of plastic tube and auger spring gear unit.
1) Remove the set screw ST3X6 (1 pc.) to remove the waste toner feeder plate from
the frame.
2) Pull the waste toner feeder (U) 2 out of the printer.
Fig.7-45
Waste toner feeder (U) 2
Fig.7-46
VII-31
FP2 gear ASSY
Waste toner feeder plate