Brother HL-2600CN Service Manual page 144

31 GRID PRINT
A single color or two color (R,G,B) Grid Pattern and a full color Stripe Pattern can be
printed as Test Prints.
Procedure
Description of Procedures
1) Press the Reprint button.
2) Using the Back or Set button, select the
desired pattern (ex. grid pattern), and then
press the Reprint button.
3) Using the Back or Set button, select the
desired color (ex. red color), and then, press
the Reprint button. (c)
4) After completion of the warming-up process,
the desired pattern of the selected color will
be continuously printed.
5) Print operation is suspended by pressing the
- button.
If it is desired to return to the previous screen
(message), press the - button one more time.
o
(e) (d)
6) If it is desired to return to On-line mode,
press the Go button.
o
(a) (b)
o
(b) (c)
o
(d)
(d)
o
(d) (e)
o
(f) (g)
V-19
LCD Message
SERVICE MODE
a)
TEST PRINT
31 TEST PRINT
b)
GRID STRIPE
31 GRID PRNT
c)
Y/M/C/K/R/G/B
R:YM
G:YC
B:MC
31 GRID PRNT [YM]
d)
31 GRID PRNT
e)
Y/M/C/K/R/G/B
SERVICE MODE
f)
TEST PRINT
01 WAIT
g)
[ ] [
[ ]
]