Paper Discharger Unit Replacement - Brother HL-2600CN Service Manual

2.4 Paper Discharger Unit Replacement

<Criterion of Replacement>
The paper discharger should be replaced with a new discharger unit at the same
time as the transfer roller 2 according to the periodical maintenance cycle set out in
Table 6-4.
When time is due for replacement of paper discharger unit, the following message
appears on the control panel. (The display is blinked.)
REPLACE 120K KIT
<Purpose of Replacement>
To prevent the discharging efficiency from declining due to deterioration of the paper
discharger unit.
PRECAUTION
Do not touch the corona wire of the paper discharger unit.
<Necessary Tools and Replacement Materials>
1) Two or three pieces of cotton cloth for cleaning
2) Paper discharger (one unit)
<Work Procedures>
Sequence of Disassembling
1) After turning off the remote switch and power supply, unplug the power code
from the power outlet.
2) Open the transfer unit 2.
VI-30